null

Offering Info

Certificate III in Joinery

  • National Course Code: CPC31912
  • TAFE NSW code: CPC31912-01V03-21WLG-999

Location – Wollongong - Apprenticeship

Study Type

Part Time Day

Course Start Date

Anytime

Study Commitment

Enquire Hours per week

Duration

3 Years

  • Nationally Recognised Training
  • Apprenticeship Allowed
  • This training is fully government-subsidised under JobTrainer

Course Details

This qualification provides a trade outcome in joinery covering work for residential and commercial applications.

This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.

Occupational titles may include:

  • Joiner.

The qualification has core unit of competency requirements that cover common skills for the construction industry, as well as a specialist field of work.

The construction industry strongly affirms that training and assessment leading to recognition of skills must be undertaken in a real or very closely simulated workplace environment and this qualification requires all units of competency to be delivered in this context.

Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCOHS1001A covers this requirement.

Licensing/Regulatory Information

Check with relevant state and territory licensing and regulatory authorities. State and territory jurisdictions may have different regulatory requirements

This course is superseded. You can still enrol in this course, and you will be contacted if you need to transition into the next version when it is available.

When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.

Completion of the general induction training program specified by the National Code of Practice for Induction Training for Construction Work (ASCC 2007) is required before entering a construction work site. Achievement of unit CPCCWHS1001 covers this requirement.

ADDITIONAL REQUIREMENTS

With 130 locations across the state, TAFE NSW tailors qualifications to meet the needs of the local community and specific student groups (like apprentices, fast-tracked and online students). To make sure this course is the right fit for you, we will need you to demonstrate that you can meet the additional requirements below.

To be enrolled in this course, you need to be able to provide evidence that you are:

  • an apprentice (you will work in industry and study at the same time)
  • employed full time
  • signed up with an Apprentice Network Provider and have a Training Plan Proposal
  • seeking to gain skills and knowledge to become a qualified Joiner after successful completion.
  • Learners must hold a current SafeWork General Construction Induction (Whitecard).

To register for an information session, head to tafensw.edu.au/infofest. Students who cannot attend the Information Session please make an online enquiry or contact us on 131 601 for more information about the course!

STUDY COMMITMENT

This is a face to face course delivered by block attendance. Each block session you will need to attend approximately 24 hours of class, over 3 days a week, for 3 years.

You may also be required to complete approximately 22 hours of additional study each week outside of class hours, including private study, assignment preparation, research and work experience.

IS THIS COURSE RIGHT FOR YOU?

This course offering is designed for people who:

  • are a Joinery apprentice looking to complete their time and continue as per licensing requirements.

SERVICES AND STUDY SUPPORT

There are additional learning and study tools available for this course, including:

  • Timetabled tutorial support from the teaching team will be addressed and discussed at orientation or your first day of class. All LLN support will be met upon request and student identification.

We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services

As a TAFE NSW student in this course, you will have access to:

  • LinkedIn Learning (formerly Lynda.com)
  • Smarthinking - after hours online study support service
  • Easy computing online short courses
  • Access to local TAFE libraries
  • Accessibility and Disability Support Services
  • Access to Read&Write learning support software at TAFE and at home

This course will be offered by block delivery. Each block session you will be typically required to attend 3 days, Wednesday to Friday from 8.00am to 4.30pm. This timetable may change and will be confirmed by your teacher.

This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.

SMART AND SKILLED FEES

This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.

For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?

"ADDITIONAL RESOURCES

You will need to provide for yourself the following resources which you will keep when you complete your study:

Students are required to provide and bring to each session appropriate Personal Protective Equipment (PPE) which may include:
safety glasses, gloves, safety footwear, suitable clothing such as cotton drill work wear and other equipment (e.g. ear protection or respiratory masks) in line with industry requirements for their workplace or worksite.

READ BEFORE YOU ENROL

Learn about TAFE NSW Fees

Learn about TAFE NSW Payment/Funding

RECOGNITION

Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

Learn about Recognition at TAFE NSW Recognition

Before you can start an apprenticeship, you first need to find an employer in the industry you're interested in that will support you through your studies. You and your employer should contact an Apprenticeship Network Provider (ANP) and tell them you're interested in studying at TAFE NSW.
The ANP will help you and your employer to complete a Training Contract. Once you have a Training Contract, we will help you, your employer and the ANP to complete a Training Plan Proposal. Once you have both these documents, the ANP will lodge them with State Training Services, who will provide further advice about next steps.

Find out more: https://www.training.nsw.gov.au/apprenticeships_traineeships/index.html

For further information or assistance, call 131 601.

Find out more about Applying and Enrolling

Core Units
Number Title
CPCCCM2001A Read and interpret plans and specifications
CPCCSH3001A Set out and assemble cabinets, showcases, wall units, counters and workstations
CPCCCA2002B Use carpentry tools and equipment
CPCCJN3002A Use computer-controlled machinery
CPCCCM2007B Use explosive power tools
CPCCJN3001A Use static machines
CPCCCM1012A Work effectively and sustainably in the construction industry
CPCCCM2010B Work safely at heights
CPCCOHS2001A Apply OHS requirements, policies and procedures in the construction industry
CPCCCM2006B Apply basic levelling procedures
CPCCCM1015A Carry out measurements and calculations
CPCCCM1014A Conduct workplace communication
CPCCCA2011A Handle carpentry materials
CPCCJN3003A Manufacture components for door and window frames and doors
CPCCJN3004A Manufacture joinery components
CPCCCM1013A Plan and organise work
Elective Units
Number Title
CPCCPD3021A Prepare surfaces for painting
CPCCCA3011A Refurbish timber sashes to window frames
CPCCSH3005A Apply and trim decorative finishes
CPCCSH3006A Apply finishes
CPCCJS3003A Assemble and install stairs
CPCCCA3015A Assemble partitions
CPCCCA3014A Construct bulkheads
CPCCCA3016A Construct timber external stairs
CPCCJN3005A Cut and install glass
CPCCCA3010A Install and replace windows and doors
MSFFM3006 Install furnishing products
CPCCCA3013A Install lining, panelling and moulding
CPCCJS3002A Manufacture stair components for straight flighted stairs
MSFFM3011 Measure and draw site layout for manufactured furniture products

Note: Not all elective units listed may be available to study, please enquire for more information.

Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.

Course Location

Wollongong
Foleys Lane, North Wollongong
Phone 131 601

Fees information

We understand that many students are confused by different fees for similar courses, and want to reassure you that studying with TAFE NSW won't damage your hip pocket.

Learn more about Fees information.

Payment options and assistance

Explore payment methods, pay by instalment, scholarships and VET Student Loans.

Learn more about Payment options and assistance.

 

Unsave Course

Download Course Brochure

Enter your details to make an enquiry and receive the course brochure

21WLG-999 S:02 Jan 2021 E:31 Dec 2021 D:363