Certificate II in Aeroskills
- National Course Code: MEA20418
- TAFE NSW code: MEA20418-01V01-21TAM-031
Location – Tamworth
Study Type
Full Time
Course Start Date
Enquire Now
Study Commitment
14 Hours per week
Duration
36 Weeks
- Nationally Recognised Training
- Traineeship Allowed
- This training is fully government-subsidised under JobTrainer
Course Details
This qualification applies to employees in aviation maintenance workshops who are required to perform repair and overhaul tasks on a limited range of aircraft electrical, hydraulic, pneumatic, electro-hydraulic and electro-pneumatic components, or who perform simple repairs on a limited range of structural components.
This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.
Units of competency that comprise this qualification are a mix of common units that apply to all technical employment streams covered by the MEA Aeroskills Training Package (core units) and technical stream units that are specific to a technical employment stream (elective units).
The qualification provides significant credits towards higher level Aeroskills Certificates.
This qualification applies to workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA). Any regulatory/licensing requirements associated with any MEA units of competency must be met.
When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.
There are no entry requirements for this qualification.
To register for an information session, head to tafensw.edu.au/infofest. Students who cannot attend the Information Session please make an online enquiry or contact us on 131 601 for more information about the course!
INFORMATION SESSIONS
There are no information sessions currently scheduled for this course
STUDY COMMITMENT
This is a fulltime, face to face course. You will need to attend approximately 14 hours of class, over 5 days a week, for 1 year.
You may also be required to complete approximately 5.9 hours of additional study each week outside of class hours.
IS THIS COURSE RIGHT FOR YOU?
For learners that have little or no experience in the Aviation industry. Learners of this cohort are keen to learn about the aviation industry. Learners are undertaking this qualification to determine their career pathways within the industry. In some instances, learners may be School Based Trainees working for an aviation maintenance organisation.
SERVICES AND STUDY SUPPORT
Every effort is made by TAFE NSW staff to ensure a successful outcome for enrolled learners. TAFE NSW offers a free tutorial support service to all TAFE NSW learners and further support services include
- Easy computing online short courses
- Library resources
We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services
As a TAFE NSW student in this course, you will have access to:
- LinkedIn Learning (formerly Lynda.com)
- Smarthinking - after hours online study support service
- Easy computing online short courses
- Access to local TAFE libraries
- Accessibility and Disability Support Services
- Access to Read&Write learning support software at TAFE and at home
To keep you safe while studying, some of our face to face classes may be replaced with online or connected learning. We have also modified our face to face classes to meet physical distancing requirements and increased cleaning on campus. As restrictions ease, the way you attend your class may change again. If work placement and the demonstration of practical skills are requirements of your course, due to the impacts of COVID-19 there may be a delay or modification in being able to undertake these aspects of your course in the planned timeframe. Be assured, we'll keep you informed every step of the way.
This course is currently scheduled on Monday to Thursday from 8.00am to 3.00pm and Friday from 8.00am to 12.00pm. This timetable may change and will be confirmed by your teacher.
This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.
SMART AND SKILLED FEES
This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.
Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.
For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?
ADDITIONAL RESOURCES
You will need to provide personal stationary to undertake the course including calculators, PPE including safety boots, cotton drill work wear, safety glasses, earmuffs, masks and hard hats.
READ BEFORE YOU ENROL
Learn about TAFE NSW Fees
Learn about TAFE NSW Payment/Funding
RECOGNITION
Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.
Learn about Recognition at TAFE NSW Recognition
Enrolments for this course have now closed.
Enquire now and we will contact you when enrolments open. Visit our Online Courses to view our range of study options that you can start anytime.
Core Units
| Number | Title |
|---|---|
| MEA107 | Interpret and use aviation maintenance industry manuals and specifications |
| MEA117 | Apply self in the aviation maintenance environment |
| MSMENV272 | Participate in environmentally sustainable work practices |
| MEA158 | Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance |
| MEA155 | Plan and organise aviation maintenance work activities |
| MEA156 | Apply quality standards during aviation maintenance activities |
| MEA154 | Apply work health and safety practices in aviation maintenance |
| MEA157 | Complete aviation maintenance industry documentation |
Elective Units
| Number | Title |
|---|---|
| MEA239 | Fabricate aircraft electrical looms and harnesses |
| MEA238 | Perform routine removal and installation of miscellaneous aircraft electrical hardware/components |
| MEA331 | Maintain aircraft gas turbine engine components or parts |
| MEA332 | Maintain aircraft mechanical components or parts |
| MEA329 | Maintain aircraft basic hydraulic and pneumatic components or parts |
| MEA330 | Maintain aircraft non-primary structural removable components or parts and internal fittings |
| MEA333 | Maintain aircraft piston engine components or parts |
| MEA406 | Repair/modify aircraft non-primary structural sheet metal components |
| MEA407 | Repair/modify aircraft non-primary structural non-metallic components |
| MEA295 | Use electrical test equipment to perform basic electrical tests on aircraft and components |
Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.
Course Location
Tamworth
13 Janison Street,
Tamworth
Phone
131 601
Download Course Brochure
Enter your details to make an enquiry and receive the course brochure