Course Start Date
6.7 Hours per week
- Nationally Recognised Training
- Apprenticeship Allowed
- This training is fully government-subsidised under JobTrainer
This qualification applies to employees of Civil Aviation Maintenance Organisations (AMOs) or to members of the Australian Defence Force (ADF) who perform scheduled inspections, fault diagnosis and repair, and modification of airframes and airframe mechanical, hydraulic and pneumatic systems and components, and of aircraft engines and (where applicable) propellers.
This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.
The qualification defines the exit from an apprenticeship and may apply to either aircraft maintenance performed on flight lines/ramps and in hangars, or to airframe and engine component repair and overhaul performed in workshops. These outcomes are defined in two streams:
- aircraft maintenance stream
- component maintenance workshop stream.
The qualification consists of:
common units that apply to all Aeroskills specialist streams at AQF Certificate III and IV levels
mechanical and structures technical stream units relating to airframe and engine system and component maintenance
mechanical technical stream units and a small number of avionic stream units that are applicable to the aircraft component maintenance workshop stream.
Because of the wide application of this qualification there is considerable flexibility in the selection of technical stream units and individuals should be mindful of their future career aspirations when selecting units for, in particular, the aircraft maintenance stream. Provided that the correct elective units are selected, the qualification articulates with the MEA50218 Diploma of Aeroskills (Mechanical) which qualifies individuals for the grant by Civil Aviation Safety Authority (CASA) of a B1 Aircraft Maintenance Engineer Licence.
To register for an information session, head to tafensw.edu.au/infofest. Students who cannot attend the Information Session please make an online enquiry or contact us on 131 601 for more information about the course!
There are no information sessions currently scheduled for this course
Block release delivery: Over a three year period student will attend either of the follow blocks:
- 3 x 12 weeks per year = 1250 hours; or
- 2 x 18 weeks per year = 1250 hours.
Students attend years 1, 2 and 3.
In their 4th year students will undertake their workplace journals.
Total attendance: 36 weeks in total x 26 hours per week = 936 hours
This is a part time, Blended course. You will need to attend approximately 6.7 hours of class, over 5 days a week, for 4 years. As well as the in-class component, you will need to complete approximately 0.1 hours of other study per week.
You may also be required to complete approximately 1.9 hours of additional study each week outside of class hours, including a Journal/Log of industrial experience and achievement.
IS THIS COURSE RIGHT FOR YOU?
The learner target group for Certificate IV in Aeroskills (Mechanical) Aircraft Maintenance stream include Apprentices only.
The learners are employed by Civil Aviation Maintenance Organisations (AMOs) or members of the Australian Defence Force (ADF) who perform scheduled inspections, fault diagnosis and repair, and modification of airframes and airframe mechanical, hydraulic and pneumatic systems and components, and of aircraft engines and (where applicable) propellers including Jetstar and Qantas, BAE, CORPORATE AIR, Sigma Aerospace, Pay's Air Service Pty Ltd, Forest Air Helicopters, Superair Services Pty Ltd and Safran Helicopter Engines Australia Pty Ltd.
The listed units also satisfy CASA requirements for the grant, under Civil Aviation Regulation (CASR) Part 66, of Aircraft Maintenance Engineer B1 License in sub-categories B1.1 and B1.3 when the skills and knowledge requirements align with CASA syllabus requirements in the Companion Volume and CASA Interface and training has been delivered in accordance with the requirements of CASR Part 147.
Entry Points some students enter the Cert IV having completed the Cert II.
This course was developed through extensive industry consultation with aviation organisations including QANTAS and Jet Star.
SERVICES AND STUDY SUPPORT
We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services
As a TAFE NSW student in this course, you will have access to:
- LinkedIn Learning (formerly Lynda.com)
- Smarthinking - after hours online study support service
- Easy computing online short courses
- Access to local TAFE libraries
- Accessibility and Disability Support Services
- Access to Read&Write learning support software at TAFE and at home
To keep you safe while studying, some of our face to face classes may be replaced with online or connected learning. We have also modified our face to face classes to meet physical distancing requirements and increased cleaning on campus. As restrictions ease, the way you attend your class may change again. If work placement and the demonstration of practical skills are requirements of your course, due to the impacts of COVID-19 there may be a delay or modification in being able to undertake these aspects of your course in the planned timeframe. Be assured, we'll keep you informed every step of the way.
This course is currently scheduled on Monday to Friday from 8.00am to 3.00pm via block release. This timetable may change and will be confirmed by your teacher.
This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.
SMART AND SKILLED FEES
There are a range of study options for NSW Apprentices and eligible non-apprentices with relevant industry work experience in this course.
Under the NSW Government fee-free apprenticeship initiative, NSW apprentices that commence their training on or after 1 July 2018 may be eligible for fee-free training. Apprentices are required to provide evidence of their NSW apprenticeship to finalise their enrolment and applicable fees.
This course is also a TAFE NSW Trade Pathways Qualification and ideal if you have been working in this industry for an extended period of time but havent received a qualification. To be eligible to enrol as a non-apprentice and secure funding, you must firstly meet the Smart and Skilled eligibility criteria and be:
- over 21 years of age
- able to demonstrate and provide evidence of extensive industry experience and
- able to demonstrate relevant ongoing work experience and provide workplace evidence to support the achievement of competence.
You will need to provide personal stationary, calcuators, PPE including safety boots, cotton drill work wear, safety glasses, earmuffs, masks and hard hats for yourself to undertake the course.
READ BEFORE YOU ENROL
Learn about TAFE NSW Fees
Learn about TAFE NSW Payment/Funding
Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.
Learn about Recognition at TAFE NSW Recognition
|MEA107||Interpret and use aviation maintenance industry manuals and specifications|
|MEA118||Conduct self in the aviation maintenance environment|
|MEA154||Apply work health and safety practices in aviation maintenance|
|MEA155||Plan and organise aviation maintenance work activities|
|MEA156||Apply quality standards during aviation maintenance activities|
|MEA157||Complete aviation maintenance industry documentation|
|MEA158||Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance|
|MSMENV272||Participate in environmentally sustainable work practices|
|MEA201||Remove and install miscellaneous aircraft electrical hardware/components|
|MEA246||Fabricate and/or repair aircraft electrical hardware or parts|
|MEA296||Use electrical test equipment in aviation maintenance activities|
|MEA301||Perform aircraft flight servicing|
|MEA303||Remove and install aircraft pneumatic system components|
|MEA304||Remove and install non-pressurised aircraft structural and non-structural components|
|MEA305||Remove and install aircraft fixed wing flight control system components|
|MEA306||Remove and install engines and engine system components|
|MEA309||Inspect, test and troubleshoot aircraft hydro-mechanical and landing gear systems and components|
|MEA310||Inspect, test and troubleshoot aircraft pneumatic systems and components|
|MEA312||Inspect, test and troubleshoot aircraft fixed wing flight control systems and components|
|MEA313||Inspect, test and troubleshoot piston engine systems and components|
|MEA314||Inspect, test and troubleshoot gas turbine engine systems and components|
|MEA315||Inspect, test and troubleshoot propeller systems and components|
|MEA316||Inspect, test and troubleshoot rotary wing rotor and control systems and components|
|MEA317||Remove and install pressurised aircraft structural and non-structural components|
|MEA318||Inspect aircraft hydro-mechanical, mechanical, gaseous and landing gear systems and components|
|MEA319||Inspect gas turbine engine systems and components|
|MEA320||Test and troubleshoot aircraft hydro-mechanical, gaseous and landing gear systems and components|
|MEA321||Test and troubleshoot aircraft fixed wing flight control systems and components|
|MEA322||Test and troubleshoot gas turbine engine systems and components|
|MEA327||Fabricate and/or repair aircraft mechanical components or parts|
|MEA328||Maintain and/or repair aircraft mechanical components or parts|
|MEA339||Inspect, repair and maintain aircraft structures|
|MEA398||Remove and install aircraft hydro-mechanical and landing gear system components|
Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.
13 Janison Street, Tamworth
Phone 131 601
Download Course Brochure
Enter your details to make an enquiry and receive the course brochure