null

Offering Info

Certificate I in Engineering

  • National Course Code: MEM10105
  • TAFE NSW code: MEM10105-01V07-20TAR-063

Location – Taree

Study Type

Part Time Day

Course Start Date

Enquire Now

Study Commitment

10 Hours per week

Duration

15 Weeks

  • Nationally Recognised Training
  • This training is subsidised by the NSW Government
  • Fully Subsidised Course

Course Details

This course is for people entering employment in manufacturing, engineering and related industry areas. You will gain the basic competencies required to work as an operator in these areas.

You will acquire skills and knowledge in workplace communication, occupational health and safety, quality procedures and planning, plus some industry-specific skills in a production or process area relevant to your current or intended employment.

The course duration will vary depending on the training pathway agreed to between you, your employer and the TAFE college.

This course is superseded. You can still enrol in this course, and you will be contacted if you need to transition into the next version when it is available.

When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.

There are no entry requirements for this qualification.

ADDITIONAL REQUIREMENTS

With 130 locations across the state, TAFE NSW tailors qualifications to meet the needs of the local community and specific student groups (like apprentices, fast-tracked and online students). To make sure this course is the right fit for you, we will need you to demonstrate that you can meet the additional requirements below.

To be enrolled in this course, you need to be able to provide evidence that you are:

  • Eligible for Smart and Skilled entitlement.

"INFORMATION SESSIONS

There are no information sessions currently scheduled for this course.

STUDY COMMITMENT

This is a part-time day, face to face course. You will need to attend approximately 10 hours of class, over 2 days a week, for I5 weeks.

You may also be required to complete approximately 10 hours of additional study each week outside of class hours, including private study, research and assignment preparation.

IS THIS COURSE RIGHT FOR YOU?

This course offering is designed for people who:

  • Are interested in learning basic skills and knowledge in Metal Fabrication and Welding. Partcipants include those from a pre-employment group, new entrant and job seekers.
  • No prior skills and knowledge of Metal Engineering are required.

MORE ABOUT THIS COURSE

There is a new version of this course coming soon. If it is available before you complete your studies, you will be notified of your options and may be transferred to the new course.

SERVICES AND STUDY SUPPORT

TAFE NSW provides the following services to ensure a supported and successful learning environment for all students:

  • Aboriginal and/or Torres Strait Islander Student Support and Services
  • Accessibility and Disability Services
  • Personal Counselling
  • Vocational Counselling
  • Learning Support
  • International Student Support
  • Scholarships
  • Multicultural Support

Detailed current information on these Support Services are made available to staff and students at TAFE NSW Student Services. Additionally, every student is supported by a dedicated Student Services team at each campus location.

We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services

As a TAFE NSW student in this course, you will have access to:

  • LinkedIn Learning (formerly Lynda.com)
  • Studiosity - online access to a real life tutor
  • Easy computing online short courses
  • Access to local TAFE libraries
  • Accessibility and Disability Support Services
  • Access to Read&Write learning support software at TAFE and at home

To keep you safe while studying, some of our face to face classes may be replaced with online or connected learning. We have also modified our face to face classes to meet physical distancing requirements and increased cleaning on campus. As restrictions ease, the way you attend your class may change again. If work placement and the demonstration of practical skills are requirements of your course, due to the impacts of COVID 19 there may be a delay or modification in being able to undertake these aspects of your course in the planned timeframe. Be assured, we'll keep you informed every step of the way.

This course is currently scheduled on Tuesday and Thursday from 9.00am to 2.30pm. This timetable may change and will be confirmed by your teacher.

SMART AND SKILLED FEES

This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.

For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?

"FULLY GOVERNMENT SUBSIDISED

This course is fully government-subsidised for eligible students, meaning you will not have to pay any course fees. It is part of a program to help people develop the skills they need to get a job, undertake entry level qualifications or transition to a new job.

If you are not eligible for subsidised training, you can still choose to enrol in the course but will need to pay the full (non-subsidised) fee.

There will be additional fees for Personal Protective Equipment (PPE) and Learner Resources. Costs will be advised upon orientation.

READ BEFORE YOU ENROL

Learn about TAFE NSW Fees

Learn about TAFE NSW Payment/Funding

RECOGNITION

Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

Learn about Recognition at TAFE NSW Recognition

Enquire now for Semester 2 2020 and be notified when enrolments open.

TAFE NSW is open for business so to find out more information on this course including when it will start and how it will be delivered (face-to-face, in a virtual classroom, self-paced, online or a mixture), submit an online enquiry by clicking the Enquire Now button on this page. You can also call 131 601 during business hours* to chat with a member of our friendly customer service team.

* Our customer service team are available from Monday to Friday, 9am to 5pm AEST.

Core Units
Number Title
MEM13014A Apply principles of occupational health and safety in the work environment
MEM14004A Plan to undertake a routine task
MEM15024A Apply quality procedures
MEM16007A Work with others in a manufacturing, engineering or related environment
Elective Units
Number Title
MEM03003B Perform sheet and plate assembly
MEM05004C Perform routine oxy acetylene welding
MEM05005B Carry out mechanical cutting
MEM05006C Perform brazing and or silver soldering
MEM05007C Perform manual heating and thermal cutting
MEM05012C Perform routine manual metal arc welding
MEM12001B Use comparison and basic measuring devices
MEM12023A Perform engineering measurements
MEM18001C Use hand tools
MEM18002B Use power tools/hand held operations

Note: Not all elective units listed may be available to study, please enquire for more information.

Operator-production worker or operator-process worker at level C13 under the Metal, Engineering and Associated Industries Award.

Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.

Course Location

Taree
Montgomery Crescent, Taree
Phone 131 601

Fees information

We understand that many students are confused by different fees for similar courses, and want to reassure you that studying with TAFE NSW won't damage your hip pocket.

Learn more about Fees information.

Payment options and assistance

Explore payment methods, pay by instalment, scholarships and VET Student Loans.

Learn more about Payment options and assistance.

 

Unsave Course

Download Course Brochure

Enter your details to make an enquiry and receive the course brochure