null

Offering Info

Certificate II in Engineering

  • National Course Code: MEM20105
  • TAFE NSW code: MEM20105-01V09-20TAR-120

Location – Taree

Study Type

Part Time Day

Course Start Date

10 Feb 2020

Hours Per Week

10

Duration

1 Year

  • Nationally Recognised Training
  • Traineeship Allowed
  • This training is subsidised by the NSW Government

Course Details

This course is for people who need the competencies to work at the basic production operator level in manufacturing, engineering and related industry areas.

You will acquire skills and knowledge in workplace communication, occupational health and safety, quality procedures systems and planning, plus some industry- specific skills in a production or process area relevant to your current or intended employment.

The course duration will vary depending on the training pathway agreed to between you, your employer and the TAFE college.

When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.

There are no entry requirements for this qualification.

It's all happening at TAFE NSW InfoFest. Register for an information session to broaden your skills set to get ahead. Can't find an Information Session for you? Enquire Online or call 131601.

INFORMATION SESSIONS
To find out more about this course, meet our teachers and receive information about enrolment and next steps, attend an information session.
Date: Thursday 23 January 2020
Time: 10:00am to 6:00pm (anytime drop in)
Location: Taree Campus, Building B, Level G, Room 22

STUDY COMMITMENT
This is a part time blended course. You will need to attend approximately 8 hours of class a week for 1 year. As well as the in-class component, you will need to complete approximately 2 hours of other study per week.

You may also be required to complete approximately 8 hours of additional study each week outside of class hours including private study, research and assignment preparations.


IS THIS COURSE RIGHT FOR YOU?
This course offering is designed for learners who are currently seeking employment in the Metal and Engineering industry.

SERVICES AND STUDY SUPPORT
There are additional learning and study tools available for this course, including:

  • Aboriginal and/or Torres Strait Islander Student Support and Services
  • Accessibility and Disability Services
  • Personal Counselling
  • Vocational Counselling
  • Learning Support
  • International Student Support
  • Scholarships
  • Multicultural Support
    Detailed current information on these Support Services are made available to staff and students at TAFE NSW Student Services. Additionally, every student is supported by a dedicated Student Services team at each campus location.

    We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services

    As a TAFE NSW student in this course, you will have access to:

    • LinkedIn Learning (formerly Lynda.com)
    • Studiosity - online access to a real life tutor
    • Easy computing online short courses
    • Access to local TAFE libraries

This course is currently scheduled on Mondays from 8:00am to 3:30pm. This timetable may change and will be confirmed by your teacher.

SMART AND SKILLED FEES

This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.

For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?

You will need to provide the following resources which is retained on completion of study:



  • Personal Protective Equipment (PPE) and Learner Resources. Costs will be advised upon orientation.


READ BEFORE YOU ENROL

Learn about TAFE NSW Fees

Learn about TAFE NSW Payment/Funding

RECOGNITION

Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

Learn about Recognition at TAFE NSW Recognition

Enrolling with us is easy, though the exact process does depend on your course and any prerequisites that go with it. Be sure to read all course information carefully to make sure it is the right qualification, location and study type for you. Enrol and pay online via our secure payment gateway to secure your place. As you progress through the enrolment process you will be prompted to provide additional information.

For further information or assistance, call 131 601.

If you are interested in studying as a Trainee please call 131 601 for full details.

Find out more about Applying and Enrolling

Core Units
Number Title
MEM13014A Apply principles of occupational health and safety in the work environment
MEM14004A Plan to undertake a routine task
MEM15002A Apply quality systems
MEM15024A Apply quality procedures
MEM16007A Work with others in a manufacturing, engineering or related environment
Elective Units
Number Title
MEM05005B Carry out mechanical cutting
MEM05007C Perform manual heating and thermal cutting
MEM05012C Perform routine manual metal arc welding
MEM05049B Perform routine gas tungsten arc welding
MEM05050B Perform routine gas metal arc welding
MEM09002B Interpret technical drawing
MEM11011B Undertake manual handling
MEM12023A Perform engineering measurements
MEM12024A Perform computations
MEM14005A Plan a complete activity
MEM18001C Use hand tools
MEM18002B Use power tools/hand held operations

Note: Not all elective units listed may be available to study, please enquire for more information.

Operator-production worker or operator-process worker at level C12 under the Metal, Engineering and Associated Industries Award.

Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.

Enrol Now

Course Location

Taree
Montgomery Crescent, Taree
Phone 131 601

Fees information

We understand that many students are confused by different fees for similar courses, and want to reassure you that studying with TAFE NSW won't damage your hip pocket.

Learn more about Fees information.

Payment options and assistance

Explore payment methods, pay by instalment, scholarships and VET Student Loans.

Learn more about Payment options and assistance.

 

Enrol Now
Unsave Course

Download Course Brochure

Enter your details to make an enquiry and receive the course brochure