null

Offering Info

Certificate II in Engineering

  • National Course Code: MEM20105
  • TAFE NSW code: MEM20105-01V09-21DCE-160

Location – Design Centre Enmore (Jewellery)

Study Type

Full Time

Course Start Date

19 Jul 2021

Study Commitment

16 Hours per week

Duration

17 Weeks

  • Nationally Recognised Training
  • Traineeship Allowed
  • This training is fully government-subsidised under JobTrainer

Course Details

The nationally accredited Certificate II in Engineering leads to entry-level engineering roles in several growing industries and provides you with a direct study pathway into an engineering trade qualification. Gain a broad understanding of underpinning engineering principles, and use your electives to explore mechanical engineering, fabrication and more.

LEARN NEW SKILLS

Through a mix of theory and practical coursework, learn to:

  • Apply foundation engineering principles
  • Put planning skills into action
  • Work with quality procedures and systems
  • Follow work, health and safety regulations and codes of practice

DEVELOP YOUR TALENT

Develop the attributes to help you get ahead:

  • A genuine interest in the engineering and manufacturing industry
  • An enthusiasm to perform practical hands-on work
  • Investigation and problem-solving talents
  • Great communication skills
  • Mechanical aptitude

ACHIEVE YOUR GOALS
Completing this course will provide you with:

  • A nationally recognised qualification at Certificate II level
  • Strong study pathways to continue your training and enhance your career opportunities

Career opportunities

  • Jewellery maker
  • Engineering factory worker
  • Production worker
  • Warehouse operator (metal and engineering)

GROW YOUR CAREER

Take your career further with:

  • Certificate III in Engineering - Trade qualification
  • Certificate IV in Engineering
  • Diploma of Engineering - Advanced Trade
  • Diploma of Engineering - Technical (Mechanical)
  • Diploma of Engineering - Technical (Mechatronics)

When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.

ENTRY REQUIREMENTS

There are no entry requirements for this qualification. You can enrol now.

Traineeship

TAFE NSW also offers the Certificate II in Engineering as a traineeship. To be eligible to enrol in the course as a trainee you must:

  • Be employed in the engineering industry as this course is delivered in the workplace
  • Have a signed traineeship contract

Thinking about a traineeship? Enquire today

IS THIS COURSE RIGHT FOR YOU?

To be prepared for this course, we recommend that you have:

  • Completed Year 10 of high school
  • A good understanding of math and English
  • Current employment in the engineering and manufacturing industry

If you need help preparing for study, contact us about your options.

ADDITIONAL REQUIREMENTS

With 130 locations across the state, TAFE NSW tailors qualifications to meet the needs of the local community and specific student groups (like apprentices, fast-tracked and online students). To make sure this course is the right fit for you, we will need you to demonstrate that you can meet the additional requirements below.

To successfully complete this course, you will need:

  • To prioritise time for skill development. Projects may include the use of specialist materials, tools and equipment, and require close attention to detail and safety.

Discover the skills you need for the job you want at the TAFE NSW Information Sessions, 21-25 June 2021.

*INFORMATION SESSIONS

To find out more about this course, meet our teachers and receive information about enrolment and next steps, attend an information session.

Date Time Location
Wednesday, 23 June 2021 6.00pm to 8.00pm Join Information Session Here

STUDY COMMITMENT

This is a full time, face to face course. You will need to attend approximately 16 hours of class, over 3 days a week, for 17 weeks.

You may also be required to complete approximately 19.5 hours of additional study each week outside of class hours, independent study, research, practice and assignments.


IS THIS COURSE RIGHT FOR YOU?

This course offering is designed for people who:

  • This introductory course is designed for students who have an interest in starting a career in jewellery manufacture but have only limited, or no practical jewellery making experience or skills. It is most suitable for people looking to begin their study of jewellery manufacture in order to move into further educational opportunities.

SERVICES AND STUDY SUPPORT

We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services

As a TAFE NSW student in this course, you will have access to:

  • LinkedIn Learning (formerly Lynda.com)
  • Smarthinking - after hours online study support service
  • Easy computing online short courses
  • Access to local TAFE libraries
  • Accessibility and Disability Support Services
  • Access to Read&Write learning support software at TAFE and at home

The way you learn may change during your enrolment to ensure the best learning experience or to keep you safe as COVID-19 restrictions change, and some of our face to face classes may change to online or virtual classroom learning. Also, to ensure that we keep you safe while studying, we may modify our face to face classes to meet physical distancing requirements and increased cleaning on campus. If work placement and the demonstration of practical skills are requirements of your course, there may be a modification or delay in the planned timeframe due to COVID-19 impacts. Be assured, we'll keep you informed every step of the way.

This course is currently scheduled on Monday and Tuesday from 8:30am to 4:30pm, and Wednesday from 8:30am to 11:30am. This timetable may change and will be confirmed by your teacher.

This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.

SMART AND SKILLED FEES

This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.

For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?

ADDITIONAL RESOURCES

You will need to provide for yourself the following resources which you will keep when you complete your study:

  • In addition to your course fee, there will be additional ongoing material costs for metal, gems and tools. Depending on the type of materials, this could be from $50.00 to $100.00. All tools are loaned to students for one semester, however it is the student's responsibility to replace any lost or damaged tools.

READ BEFORE YOU ENROL

Learn about TAFE NSW Fees

Learn about TAFE NSW Payment/Funding

RECOGNITION

Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

Learn about Recognition at TAFE NSW Recognition

Enrolling with us is easy, though the exact process does depend on your course and any prerequisites that go with it. Be sure to read all course information carefully to make sure it is the right qualification, location and study type for you. Enrol and pay online via our secure payment gateway to secure your place. As you progress through the enrolment process you will be prompted to provide additional information.

For further information or assistance, call 131 601.

If you are interested in studying as a Trainee please call 131 601 for full details. (only if available as a trainee)

Core Units
Number Title
MEM13014A Apply principles of occupational health and safety in the work environment
MEM15024A Apply quality procedures
MEM15002A Apply quality systems
MEM14004A Plan to undertake a routine task
MEM16007A Work with others in a manufacturing, engineering or related environment
Elective Units
Number Title
MEM09002B Interpret technical drawing
MEM08010B Manually finish/polish materials
MEM16006A Organise and communicate information
MEM06007B Perform basic incidental heat/quenching, tempering and annealing
MEM05006C Perform brazing and or silver soldering
MEM11011B Undertake manual handling
MEM12001B Use comparison and basic measuring devices
MEM18001C Use hand tools
MEM18002B Use power tools/hand held operations
MEM07032B Use workshop machines for basic operations
MEM13003B Work safely with industrial chemicals and materials
MEM13004B Work safely with molten metals/glass

Note: Not all elective units listed may be available to study, please enquire for more information.

Operator-production worker or operator-process worker at level C12 under the Metal, Engineering and Associated Industries Award.

Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.

Join Waitlist

Course Location

Design Centre Enmore
110 Edgeware Road, Enmore
Phone 131 601

Fees information

We understand that many students are confused by different fees for similar courses, and want to reassure you that studying with TAFE NSW won't damage your hip pocket.

Learn more about Fees information.

Payment options and assistance

Explore payment methods, pay by instalment, scholarships and VET Student Loans.

Learn more about Payment options and assistance.

 

Join Waitlist
Unsave Course

Download Course Brochure

Enter your details to make an enquiry and receive the course brochure