null

Offering Info

Certificate III in Electrotechnology Electrician

  • National Course Code: UEE30811
  • TAFE NSW code: UEE30811-01V03-20MUS-999

Location – Muswellbrook - Apprenticeship

Study Type

Part Time Day

Course Start Date

Enquire Now

Study Commitment

8 Hours per week

Duration

3 Years

  • Nationally Recognised Training
  • Apprenticeship Allowed
  • This training is subsidised by the NSW Government

Course Details

Light up your new career as a general electrician or electrical tradesperson when you study the nationally accredited Certificate III in Electrotechnology Electrician. Learn to install, test and repair electrical systems and be equipped with skills needed to join this growing industry.

LEARN NEW SKILLS

Through theory and practical course-work, you will learn:

  • To install wiring systems, accessories and appliances for low voltage general electrical installations
  • To connect electrical circuits
  • To solve problems related to electrical equipment

DEVELOP YOUR TALENT

Develop the personal qualities and skills you need to get ahead in this field:

  • Communication skills to connect with clients
  • Customer service, collaboration and consultation skills
  • Problem solving strategies
  • Attention to detail

ACHIEVE YOUR GOALS

Completing this course will equip you with:

  • A nationally recognised Certificate III qualification

GROW YOUR CAREER

Completing the Certificate III, with the appropriate elective units, can provide credit towards the UEE40611 Certificate IV in Electrotechnology - Systems Electrician or the UEE40911 Certificate IV in Industrial Electronics and Control.

INDUSTRY DEMAND

Common use of electricity is increasing due to the reliance on electrical equipment in the home and the workplace. This trend appears likely to continue, ensuring the ongoing demand for qualified electricians.

When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.

TRAINING PACKAGE ENTRY REQUIREMENTS

There are no formal Training Package entry requirements for this course.

However, the Electrotechnology Training Package recommends typical language, literacy and numeracy skill levels needed to successfully complete each Competency Standard Unit undertaken within this qualification.

TAFE NSW REQUIREMENTS

To be eligible for this course, you must:

  • Provide evidence of relevant employment (for example, a Commitment Identification Number issued by Training Services NSW for an apprentice Training Plan Proposal. This will include appropriate apprentice, employer and RTO information)
  • Meet Language Literacy and Numeracy (LLN) requirements. You will need to meet a minimum Australian Core Skills Framework Level 4 for Learning, Reading, Writing, Numeracy, Oral Communication

LICENSING REQUIREMENTS

During training: Competency development activities are subject to regulations directly related to licensing, occupational health and safety and where applicable contracts of training, such as apprenticeships.

In the workplace: The application of the skills and knowledge described in units in this qualification require a licence to practice in the workplace where work is carried out on electrical equipment or installations which are designed to operate at voltages greater than 50 V a.c. or 120 V d.c.

Other conditions may apply under State and Territory legislative and regulatory requirements.

This course meets the national Electrical Regulatory Authorities Council (ERAC) requirements for an unrestricted Electrician's License. The Certificate III in Electrotechnology - Electrician qualification meets PART of the requirements for issue of a Qualified Supervisors Certificate - Electrician issued by NSW Fair Trading, which permits the holder to work unsupervised on low voltage fixed wiring and equipment, and to directly supervise others undertaking this work.

BE PREPARED

To be prepared for this course, it is recommended that you have:

  • Language Literacy and Numeracy (LLN) to meet a minimum Australian Core Skills Framework Level 4 for Learning, Reading, Writing, Numeracy, Oral Communication.

INFORMATION SESSIONS

To find out more about this course, meet our teachers and receive information about enrolment and next steps, attend an information session.

Date: Wednesday, 22 January 2020
Time: Anytime between 1.00pm and 6.00pm
Location: Muswellbrook Campus, Building U, Ground Level, Room 1

STUDY COMMITMENT

This is a part time day course. You will need to attend approximately 8 hours of class, over 1 days a week, for 3 years. Attendance dates will be determined after enrolment and will depend upon demand.

You may also be required to complete approximately 29.6 hours of additional study each week outside of class hours, including tutorial support, prescribed reading, quizzes, review questions, Moodle and a minimum of 3 hours study per assessment per unit.


IS THIS COURSE RIGHT FOR YOU?

This course offering is designed for people who:

  • are currently employed as an electrician apprentice, wanting to do the Control stream of elective units of competence
  • are typically aged between 16 - 30 years old

SERVICES AND STUDY SUPPORT

There are additional learning and study tools available for this course, including:

  • Aboriginal and/or Torres Strait Islander Student Support and Services
  • Accessibility and Disability Services
  • Personal Counselling
  • Vocational Counselling
  • Learning Support
  • International Student Support
  • Scholarships
  • Multicultural Support

Detailed current information on these Support Services are made available to staff and students. Additionally, every student is supported by a dedicated Student Services team at each campus location.

We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services

As a TAFE NSW student in this course, you will have access to:

  • LinkedIn Learning (formerly Lynda.com)
  • Studiosity - online access to a real life tutor
  • Easy computing online short courses
  • Access to local TAFE libraries
  • Accessibility and Disability Support Services
  • Access to Read&Write learning support software at TAFE and at home

To keep you safe while studying, some of our face to face classes may be replaced with online or connected learning. We have also modified our face to face classes to meet physical distancing requirements and increased cleaning on campus. As restrictions ease, the way you attend your class may change again. If work placement and the demonstration of practical skills are requirements of your course, due to the impacts of COVID 19 there may be a delay or modification in being able to undertake these aspects of your course in the planned timeframe. Be assured, we'll keep you informed every step of the way.

Australian Apprenticeships training can be on-the-job, off-the-job or a combination of both. This course is currently scheduled on Monday from 8.00am to 4.30pm. This timetable may change and will be confirmed by your teacher.

SMART AND SKILLED FEES

This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.

Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.

For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?

ADDITIONAL RESOURCES

You will need to provide for yourself the following resources which you will keep when you complete your study:

ADDITIONAL RESOURCES

You will need to provide for yourself the following resources which you will keep when you complete your study:

  • Scientific calculator: $10.00-$20.00 approx
  • Pens, pencils, drawing instruments, A4 ruled notebooks: $20.00 approx
  • Safety glasses, hearing protection, safety boots, appropriate work clothing (PPE)
  • Electrical Principles by Peter Phillips: $80.00 approx
  • Electrical Trade Practices by Ralph Berry, Phillip Chadwick; OR Electrical Trade Principles by Jeffrey Hampson and Steven Hanssen: $80.00 approx
  • Electrotechnology Practice by Jeffrey Hampson and Steven Hanssen; OR Electrical Principles for the Electrical Trades Vol 1 & Vol 2 ? Jim Jenneson Et Al: $130.00
  • Electrical Wiring Practice Vol 1 & Vol 2 ? Keith Pethebridge, Ian Neeson and Paul Lowe: $70.00 each

READ BEFORE YOU ENROL

Learn about TAFE NSW Fees

Learn about TAFE NSW Payment/Funding

RECOGNITION

Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.

Learn about Recognition at TAFE NSW Recognition

Enquire now for Semester 2 2020 and be notified when enrolments open.

TAFE NSW is open for business so to find out more information on this course including when it will start and how it will be delivered (face-to-face, in a virtual classroom, self-paced, online or a mixture), submit an online enquiry by clicking the Enquire Now button on this page. You can also call 131 601 during business hours* to chat with a member of our friendly customer service team.

* Our customer service team are available from Monday to Friday, 9am to 5pm AEST.

Core Units
Number Title
UEENEEC020B Participate in electrical work and competency development activities
UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace
UEENEEE102A Fabricate, assemble and dismantle utilities industry components
UEENEEE104A Solve problems in d.c. circuits
UEENEEE105A Fix and secure electrotechnology equipment
UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications
UEENEEE137A Document and apply measures to control OHS risks associated with electrotechnology work
UEENEEG006A Solve problems in single and three phase low voltage machines
UEENEEG033A Solve problems in single and three phase low voltage electrical apparatus and circuits
UEENEEG063A Arrange circuits, control and protection for general electrical installations
UEENEEG101A Solve problems in electromagnetic devices and related circuits
UEENEEG102A Solve problems in low voltage a.c. circuits
UEENEEG103A Install low voltage wiring and accessories
UEENEEG104A Install appliances, switchgear and associated accessories for low voltage electrical installations
UEENEEG105A Verify compliance and functionality of low voltage general electrical installations
UEENEEG106A Terminate cables, cords and accessories for low voltage circuits
UEENEEG107A Select wiring systems and cables for low voltage general electrical installations
UEENEEG108A Trouble-shoot and repair faults in low voltage electrical apparatus and circuits
UEENEEG109A Develop and connect electrical control circuits
UEENEEK142A Apply environmentally and sustainable procedures in the energy sector
Elective Units
Number Title
UEENEEA113A Mount and wire control panel equipment
UEENEED101A Use computer applications relevant to a workplace
UEENEEI116A Assemble, enter and verify operating instructions in microprocessor equipped devices
UEENEEI150A Develop, enter and verify discrete control programs for programmable controllers

Note: Not all elective units listed may be available to study, please enquire for more information.

General electrician, electrical tradesperson.

Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.

Course Location

Muswellbrook
59 Maitland Street, Muswellbrook
Phone 131 601

Fees information

We understand that many students are confused by different fees for similar courses, and want to reassure you that studying with TAFE NSW won't damage your hip pocket.

Learn more about Fees information.

Payment options and assistance

Explore payment methods, pay by instalment, scholarships and VET Student Loans.

Learn more about Payment options and assistance.

 

Unsave Course

Download Course Brochure

Enter your details to make an enquiry and receive the course brochure