Back to Carpentry, Joinery and Furniture

    National code: CPC30120

    Certificate III in Shopfitting

    Ask a question

    OverviewAbout this course

    Help people bring their business dreams to life as a qualified shopfitter. Assist in the designing, planning and construction of a range of different shopfronts, store floors and office spaces as you gain creative and in-demand skills valued across the construction industry.

    OutcomesWhat you'll gain

    Learning outcomes

    Through a mixture of theory and practical course work, learn to:

      • Craft high quality shop fit outs
      • Mould, cut and shape a variety of materials
      • Understand construction plans, drawings and specifications
      • Organise and order materials for jobs
      • Communicate effectively and follow Work Health and Safety (WHS) procedures

    Course outcomes

    Gain practical experience and develop specialist skills that give you an advantage in the job market.

      • Experience assisting a real shopfitting workplace, with projects and key shopfitting tasks
      • Skills to prepare and design plans for contract
      • Experience installing fittings in various business situations
      • The skills and knowledge to start your own sole trader business

    SuitabilityIs this course right for you?

    Entry requirements

    This course requires evidence of previous experience or study before you can enrol

    • This course is offered as an apprenticeship. Enquire today to check the eligibility requirements.

      • To take this course as an apprenticeship you need to be employed as an apprentice in the industry as evidenced by a letter of support from your employer and
      • Submit your Training Plan Proposal (TPP) with your application​​

    Completion requirements

    During your study you’ll need to provide your teacher with the following evidence:

    • You must successfully pass both the TAFE NSW and SafeWork NSW High Risk Work Licence assessments to be eligible for your SafeWork NSW High Risk Work Licence. For more details, see the licensing section below.

    • A general construction induction card (commonly known as a white card) – you will need this before you can enter a construction site

    Entry recommendations

    To be prepared for this course, we recommend that you have:

      • A valid form of ID to prove you are at least 18 years old as part of SafeWork NSW requirements to undertake the SafeWork NSW High Risk Work Licence assessment conducted via this course
      • Punctuality and professionalism to perform your apprenticeship work duties
      • Language, Literacy and Numeracy (LLN) at a Year 10 high school level

    • TAFE NSW may ask you to complete a Language, Literacy and Numeracy (LLN) skills test.

    • This skills test helps us to understand your individual study needs, to design an individualised plan that supports your study success and ensures your LLN skills match the demands of the course.

    TAFE NSW is committed to meeting the learning needs of every community. Meeting these needs can mean there are additional entry requirements at different campus locations. Check your preferred location for further requirements. If you need help preparing for study, contact us to find out how we can support you.

    PathwaysFuture career and study options

    Career pathways

    Our graduates go onto roles like: - Qualified shopfitter and - Contractor

    Licensing

    This course leads to a licensed occupation in NSW which means you must hold a SafeWork NSW High Risk Work Licence to gain employment in this field. This course includes unit/s that allow you to apply to be assessed for the SafeWork NSW High Risk Work Licence. SafeWork NSW conducts the licence assessment and requires you to be at least 18 years old by the time you are assessed, evidenced by a valid form of ID. 

    During your course, you will enrol in your specific licensing assessment by logging into the MyServiceNSW app. Visit MyServiceNSW to set up your account.  Once logged in, follow these four steps: 

    1. Complete your digital proof of identity by providing two forms of listed identification.
    2. Select and enrol in your chosen SafeWork NSW High Risk Work Licence assessment through your MyServiceNSW account. You’ll receive a confirmation email with your Assessment Enrolment Number (AEN).
    3. Provide your AEN to the SafeWork NSW High Risk Work Licence accessor before your assessment. 
    4. After successfully completing your assessment, your results will be sent directly to your email address. 

    Please note: You can get support with the SafeWork NSW High Risk Work Licence enrolment process by calling Service NSW on 13 77 88, Monday to Friday, 7am to 7pm (AEST).

    Visit SafeWork NSW for more information.

    Study pathways

    Take your study further with other courses offered at TAFE NSW:

    Previous study0 Courses

    Begin here to gain experience and confidence in this study area.

    The Certificate III in Shopfitting does not have any pre-requisite courses.

    Further study0 Courses

    Advance your skills to take your career to the next level

    The Certificate III in Shopfitting does not have any post-graduate courses.

    Related study0 Courses

    Strengthen your expertise and gain specialist skills to expand your employability.

    The Certificate III in Shopfitting does not have any related courses.

    Your experience counts

    At TAFE NSW, we recognise your previous study and work experience. You can apply for recognition of prior learning or a credit transfer with any of our courses. If you're successful you'll get your qualification faster.

    UnitsUnits taught in this course

    Courses are made up of a combination of both core and specialty units. In the Certificate III in Shopfitting qualification, you’ll need to successfully complete 18 Units of competency, including 12 core and 6 speciality units.

    Please note, not all specialty units are offered at every TAFE NSW location. It is highly recommended that you check with your preferred campus for information about the specialty units offered at that location.

    Core units are central to the job outcomes of a particular industry or occupation. These are the units industry has agreed are essential to be capable and qualified at a particular study level.

    • Fabricate shopfitting components using CNC machinesCPCSHP3001

    • Assemble and install shopfront structuresCPCSHP3003

    • Install internal shop walls and fixturesCPCSHP3008

    • Assemble internal shopfitting units and prepare for transportCPCSHP3004

    TAFE NSW servicesFacilities and support

    TAFE NSW provides support services across all campus locations and online. Whatever your needs or circumstances, we have the people, resources, counselling and facilities to support you in focusing on your studies.

    • TAFE NSW Disability Support Service

    • TAFE NSW Language, Literacy and Numeracy (LLN) support

    • TAFE NSW Aboriginal Support; Learner support (ABE)

    • TAFE NSW Careers, Counselling and Pathways Service

    • TAFE NSW Libraries

    • Scholarship programs – be supported as you explore your talents and fulfil your potential

    • Read&Write literacy and study support software is available free for all TAFE NSW students to use while studying on campus and at home

    • LinkedIn Learning – an online resource which offers innovative courses and tutorials to improve your personal and professional skills

    • Student associations – get social with our student community

    Study optionsFind a location to enrol