Certificate II in Aeroskills
- National Course Code: MEA20418
- TAFE NSW code: MEA20418-01V01-21PAD-303
Location – Padstow
Study Type
PT Evening
Course Start Date
15 Feb 2021
Study Commitment
12 Hours per week
Duration
28 Weeks
- Nationally Recognised Training
- Traineeship Allowed
- This training is fully government-subsidised under JobTrainer
Course Details
This qualification applies to employees in aviation maintenance workshops who are required to perform repair and overhaul tasks on a limited range of aircraft electrical, hydraulic, pneumatic, electro-hydraulic and electro-pneumatic components, or who perform simple repairs on a limited range of structural components.
This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.
Units of competency that comprise this qualification are a mix of common units that apply to all technical employment streams covered by the MEA Aeroskills Training Package (core units) and technical stream units that are specific to a technical employment stream (elective units).
The qualification provides significant credits towards higher level Aeroskills Certificates.
This qualification applies to workplaces that operate under the airworthiness regulatory systems of the Australian Defence Force (ADF) and the Civil Aviation Safety Authority (CASA). Any regulatory/licensing requirements associated with any MEA units of competency must be met.
When you study with TAFE NSW, we want you to succeed. Entry requirements allow us to make sure that you have the right pre-existing knowledge and skills to achieve your chosen qualification. You will need to provide evidence that you meet the requirements listed in this section.
There are no entry requirements for this qualification.
ADDITIONAL REQUIREMENTS
With 130 locations across the state, TAFE NSW tailors qualifications to meet the needs of the local community and specific student groups (like apprentices, fast-tracked and online students). To make sure this course is the right fit for you, we will need you to demonstrate that you can meet the additional requirements below.
To successfully complete this course, you will need:
- Satisfactorily complete all training and assessments
To register for an information session, head to tafensw.edu.au/infofest. Students who cannot attend the Information Session please make an online enquiry or contact us on 131 601 for more information about the course!
INFORMATION SESSIONS
There are no information sessions currently scheduled for this course.
STUDY COMMITMENT
This is a part-time evening, blended delivery course. You will need to attend approximately 12 hours of class, over 3 evenings a week, for 28 weeks.
You may also be required to complete approximately 10 hours of additional study each week outside of class hours, including private study, assessment preparation and research.
IS THIS COURSE RIGHT FOR YOU?
Students entering this course are hopeful to gain employment and continue towards the MEA40718 Certificate IV Aeroskills apprenticeship.
SERVICES AND STUDY SUPPORT
We offer student services and study support to ensure you can achieve your goals. Learn about TAFE NSW Student Services
As a TAFE NSW student in this course, you will have access to:
- LinkedIn Learning (formerly Lynda.com)
- Smarthinking - after hours online study support service
- Easy computing online short courses
- Access to local TAFE libraries
- Accessibility and Disability Support Services
- Access to Read&Write learning support software at TAFE and at home
To keep you safe while studying, some of our face to face classes may be replaced with online or connected learning. We have also modified our face to face classes to meet physical distancing requirements and increased cleaning on campus. As restrictions ease, the way you attend your class may change again. If work placement and the demonstration of practical skills are requirements of your course, due to the impacts of COVID-19 there may be a delay or modification in being able to undertake these aspects of your course in the planned timeframe. Be assured, we'll keep you informed every step of the way.
This course is currently scheduled on Mondays, Tuesdays and Wednesdays from 5:00pm to 8:00pm. This timetable may change and will be confirmed by your teacher.
This is a fully government-subsidised JobTrainer course. Eligibility criteria applies.
SMART AND SKILLED FEES
This course is government-subsidised, meaning you pay a portion of the full course fee to TAFE NSW and the NSW Government will pay the balance. However, you must meet certain eligibility criteria for this to apply.
Depending on your previous qualifications and experience, your fee may be less than the maximum fee quoted. Your actual fee and eligibility for concession/exemption will be calculated and confirmed during the enrolment process. Payment plans are available through TAFE NSW for Smart and Skilled eligible qualifications.
For further information about eligibility and explanations of the different fee categories, visit Are You Eligible?
A fee applies for most TAFE NSW courses and must be paid when you enrol. The amount you pay depends on the type of course you study, and on your personal circumstances. An initial payment of $80 is required to confirm your enrolment into this course. If you do not wish to continue with your enrolment, you must formally advise Customer Service of your withdrawal. If you do not withdraw prior to the commencement date of the course, this initial payment is non-refundable. Please contact us on 13 79 74 for further information.
ADDITIONAL RESOURCES
You may need to provide for yourself the following resources which you will keep when you complete your study:
- PPE Equipment: approx. $100 - $200.
READ BEFORE YOU ENROL
Learn about TAFE NSW Fees
Learn about TAFE NSW Payment/Funding
RECOGNITION
Recognition is a process of acknowledging previously completed qualifications, skills, knowledge or experience relevant to your course. This may reduce the amount of learning required, reduce your course fees and allow you to achieve your qualification faster.
Learn about Recognition at TAFE NSW Recognition
Applying with us is easy, though the exact process does depend on your course and any prerequisites that go with it. Be sure to read all course information carefully to make sure it is the right qualification, location and study type for you. As you progress through the application and enrolment process you will be prompted to provide additional information.
For further information or assistance, call 13 7974.
Find out more about Applying and Enrolling
Core Units
Number | Title |
---|---|
MEA107 | Interpret and use aviation maintenance industry manuals and specifications |
MSMENV272 | Participate in environmentally sustainable work practices |
MEA158 | Perform basic hand skills, standard trade practices and fundamentals in aviation maintenance |
MEA155 | Plan and organise aviation maintenance work activities |
MEA157 | Complete aviation maintenance industry documentation |
MEA156 | Apply quality standards during aviation maintenance activities |
MEA117 | Apply self in the aviation maintenance environment |
MEA154 | Apply work health and safety practices in aviation maintenance |
Elective Units
Number | Title |
---|---|
MEA329 | Maintain aircraft basic hydraulic and pneumatic components or parts |
MEA331 | Maintain aircraft gas turbine engine components or parts |
MEA332 | Maintain aircraft mechanical components or parts |
MEA295 | Use electrical test equipment to perform basic electrical tests on aircraft and components |
Whether you're a school leaver, an aspiring apprentice, looking to kickstart a career, or you're upskilling, reskilling, or re-training, there's a TAFE NSW course to give you the skills you need for the job you want.
Apply NowCourse Location
Padstow
Raine Road,
Padstow
Phone
131 601
Download Course Brochure
Enter your details to make an enquiry and receive the course brochure