Electrotechnology

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Connect Australia Provider (ACAP) who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

• electrical powerline tradesperson

• cable jointer (powerline).

• Employment in the electrotechnology industry, as evidenced by a letter from your employer

• electrical fitter technician in areas like appliance repair, motor winding, switchboard manufacture and electrical equipment maintenance.

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Network Provider who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

• senior technician

• supervisor

• instrumentation specialist.

• Successful competition of the Certificate III in Electrotechnology Electrician (UEE30820) as evidenced by your transcript or certificate, or

• That you hold a current 'Unrestricted Electricians Licence' or its equivalent issued in an Australian state or territory, as evidenced by a copy of this licence

• Technical officer (electrical engineering)

• • Successful completion of a Certificate III in Electrotechnology Electrician, as evidenced by your academic transcript OR
• • A current 'Unrestricted Electricians Licence' or it's equivalent issued in an Australian state or territory

• technical officer

• engineering officer

• senior technical officer electrical engineering

• senior technical officer electrical maintenance.

• Current experience in the electrical trade, as evidenced by your expired licence number or a certificate from a previous trade course or qualification

• Take part in a pre-enrolment interview with a teacher. This pre-enrolment interview helps us determine that your skills match the demands of the course, to direct you to alternative study options or to provide you with the appropriate support for your success.

• apprentice electrician

• apprentice refrigeration and air-conditioning mechanic

• apprentice electronics and communication technician

• apprentice electrical fitter.

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Connect Australia Provider (ACAP) who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Connect Australia Provider (ACAP) who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

• rail traction linesman.

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Connect Australia Provider (ACAP) who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

• electrical powerline tradesperson.

• electronics technician

• broadcast engineer

• mechatronics technician

• radio technician

• medical equipment maintenance

• robotics technician

• electronics assembly worker.

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Connect Australia Provider (ACAP) who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

• electronics tradesperson or technician

• electronics equipment service technician

• electronics equipment installer

• audio visual installer.

• Successful completion of the Certificate III in Electrotechnology Electrician (UEE30820) as evidenced by a copy of your transcript or

• That you hold a current Unrestricted Electricians Licence or its equivalent issued in an Australian state or territory as evidenced by providing a copy

• industrial electronics electrician

• electronics and control technical officer

• electronics and control technical technician

• electronics and control engineer.

• technical officer (electronic and communications engineering)

• telecommunications technical officer.

• Check the campus page for requirements to take this course as an apprenticeship

• This course may also be offered as a non-apprenticeship. Enquire today to discuss your eligibility

• outdoor power equipment technician

• chainsaw mechanic

• lawnmower mechanic

• small engine mechanic

• service technician.

• Unrestricted Electrical license as evidenced by a copy of your Contractor License or Qualified Supervisor Certificate, or

• Successful completion of the unit UEEEL0039 Design, install and verify compliance and functionality of general electrical installations as evidenced by a copy of your transcript or certificate, or

• Successful completion of the unit UEERE0051 Apply electrical principles to renewable energy design as evidenced by a copy of your transcript or certificate

• electrical supervisor

• grid connected solar system designer and installer.

• Provide evidence of relevant prior previous knowledge studies for entry into this course such as a course transcript

• Experience working in the industry

You must also:

• Attend a pre-admission interview where you will also be asked to complete a numeracy task - this helps us to understand how we can support your study success and provide you with any necessary support

Note:

• Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• design officer in an engineering team

• technical sales in the renewable industry

• technical support in renewable energy industry.

You must demonstrate that you have achieved one of the following:

• Provide evidence of relevant previous studies such as a course transcript

• Experience working in the industry

You must also:

• Attend a pre-admission interview where you will also be asked to complete a numeracy task - this helps us to understand how we can support your study success and provide you with any necessary support

Note:

• Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• design officer in an engineering team

• technical sales in the renewable industry

• technical support in renewable energy industry.

• Unrestricted Electrical license as evidenced by a copy of your Contractor License or Qualified Supervisor Certificate, and

• Statement of Attainment in Grid Connected Photovoltaic Systems - Design and Install or equivalent as evidenced by a copy of your transcript or certificate

• electrical supervisor

• grid connected battery storage systems designer and installer.

You must demonstrate that you have achieved one of the following:

• Provide evidence of relevant previous studies such as a course transcript

• Experience working in the industry

You must also:

• Attend a pre-admission interview where you will also be asked to complete a numeracy task - this helps us to understand how we can support your study success and provide you with any necessary support

Note:

• Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• design officer in an engineering team

• technical sales in the renewable industry

• technical support in renewable energy industry.

You must demonstrate that you have achieved one of the following:

• Provide evidence of relevant previous studies such as a course transcript

• Experience working in the industry

You must also:

• Attend a pre-admission interview where you will also be asked to complete a numeracy task - this helps us to understand how we can support your study success and provide you with any necessary support

Note:

• Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• design officer in an engineering team

• technical sales in the renewable industry

• technical support in renewable energy industry.

You must demonstrate that you have achieved one of the following:

• Provide evidence of relevant previous studies such as a course transcript

• Experience working in the industry

You must also:

• Attend a pre-admission interview where you will also be asked to complete a numeracy task - this helps us to understand how we can support your study success and provide you with any necessary support

Note:

• Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• design officer in an engineering team

• technical sales in the renewable industry

• technical support in renewable energy industry

You must demonstrate that you have achieved one of the following:

• • A NSW Higher School Certificate (HSC) or its equivalent or
• • A Certificate IV in Tertiary Preparation or its equivalent or
• • A completed certificate IV or higher vocational qualification

You must also

• • Have mathematics knowledge to HSC level or equivalent before entering this course, or you may be required to undertake a bridging program or preparatory maths course. All students will submit a skills assessment questionnaire to test their maths capabilities.

Note:

• • Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• designer in an engineering team

• provisional grid connect solar designer

• technical sales in solar PV industry

• technical support in renewable energy industry

• design officer.

You must demonstrate that you have achieved one of the following:

• A NSW Higher School Certificate (HSC) or its equivalent or

• A Certificate IV in Tertiary Preparation or its equivalent or

• A completed Certificate IV or higher vocational qualification

You must also:

• Have mathematics knowledge to HSC level or equivalent before entering this course, or you may be required to undertake a bridging program or preparatory maths course. All students will submit a skills assessment questionnaire to test their maths capabilities.

• Attend a pre-admission interview where you may also be asked to complete a short literacy and numeracy task - this helps us to understand how we can support your study success and provide you with any necessary support.

Note:

• Your certificates, transcripts and other entry requirement evidence must be certified through a Justice of the Peace or other authorising officer

• electrical engineering design officer

• designer in an engineering team

• provisional grid connect solar designer, technical sales in solar PV industry

• technical support in renewable energy industry

• design officer, technical officer

• engineering officer.

• security installation assistant

• security cabler

• electrical trades assistant

• telecommunications trades assistant.

Apprenticeship

• Be employed as an apprentice in the industry

• Register with an Apprenticeship Connect Australia Provider (ACAP) who will support your application

Non-apprenticeship

• Non-apprenticeship pathways for trade-related qualifications allow you to have your industry skills assessed through recognition of prior learning (RPL) and undertake gap training to gain a trade qualification. To take this course as a non-apprenticeship, you must:

• Be at least 21 years of age, as evidenced by photo identification

• Have at least 2 years of work experience in this occupation or trade, as evidenced by employee records such as your resume and/or letters from your employers

• Be currently employed in the relevant industry, as evidenced by a letter from your employer

• business equipment technician

• customs electronics installations technician

• electrical fitter

• audio visual installation technician

• electronics engineering technical officer.