Back to Music and Production

    National code: CUA30420

    Certificate III in Live Production and Technical Services

    Ask a question

    OverviewAbout this course

    This course is your backstage pass to the world of live entertainment. Launch your career as a stage technician and learn the skills you need to work behind the scenes at concerts, clubs, theatres and conventions, to bring production to life.

    OutcomesWhat you'll gain

    Learning outcomes

    Through a mixture of theory and practical course work, learn to:

    • Set up microphones

    • Operate front of house and monitoring mixing consoles

    • Operate lighting consoles and a variety of lights

    • Set up and pack down stage equipment and backline

    • Bump in and bump out

    • Work with projectors, screens and vision switchers

    Course outcomes

    Gain practical experience and develop specialist skills that give you an advantage in the job market.

    • Experience working on live shows with full audio, lighting and vision production

    • Exposure to pre-production and event planning, including lighting design and stage plans

    • Strong pathways to continue your study and enhance your career opportunities

    SuitabilityIs this course right for you?

    Entry requirements

    This course requires evidence of previous experience or study before you can enrol

    • This course is offered as a traineeship. Enquire today to check the eligibility requirements.

    • You have completed the unit CPCCLRG3001 Licence to perform rigging basic level as evidenced by a copy of your transcript or certificate

    • You have completed the unit CPCCLRG3002 Licence to perform rigging intermediate level as evidenced by a copy of your transcript or certificate

    • You have completed the unit CPCCLRG4001 Licence to perform rigging advanced level as evidenced by a copy of your transcript or certificate

    • You have completed the unit CPCCLDG3001 Licence to perform dogging as evidenced by a copy of your transcript or certificate

    Completion requirements

    During your study you’ll need to provide your teacher with the following evidence:

    • You must successfully pass both the TAFE NSW and SafeWork NSW High Risk Work Licence assessments to be eligible for your SafeWork NSW High Risk Work Licence. For more details, see the licensing section below.

    Entry recommendations

    To be prepared for this course, we recommend that you have:

    • A valid form of ID to prove you are at least 18 years old as part of SafeWork NSW requirements to undertake the SafeWork NSW High Risk Work Licence assessment conducted via this course

    • Attended a range of live performances (if possible)

    • Familiarity with live sound, staging, lighting, vision systems and/or event management

    • The ability to lift portable sound and lighting equipment

    • The ability to work in a team, as collaboration is essential

    • An interest in work that is a combination of creative and technical tasks

    • A patient attitude and the ability to alternate between intense periods of work and lengthy periods of waiting

    • The ability to occasionally attend rehearsals, functions and live performances outside of class hours if needed, potentially on evenings and/or weekends

    • Language, Literacy and Numeracy (LLN) at a Year 10 high school level

    • TAFE NSW may ask you to complete a Language, Literacy and Numeracy (LLN) skills test.

    • This skills test helps us to understand your individual study needs, to design an individualised plan that supports your study success and ensures your LLN skills match the demands of the course.

    TAFE NSW is committed to meeting the learning needs of every community. Meeting these needs can mean there are additional entry requirements at different campus locations. Check your preferred location for further requirements. If you need help preparing for study, contact us to find out how we can support you.

    PathwaysFuture career and study options

    Career pathways

    Our graduates go onto roles like:

    Production Assistant (Film, Television, Radio or Stage)

    Production Assistants (Film, Television, Radio or Stage) provide technical, administrative and organisational support to producers or directors for film, television, radio or stage productions.

    • Full-time share Full-time workers usually work 35 hours or more a week (in all their jobs combined).

      60%

    • Employment size Employment size is the number of workers who do this as their main job.

      600 workers

    • Average age This is the average age of all workers in this job.

      31 years

    • Weekly pay Median earnings are shown for full-time, non-managerial employees paid at the adult rate, before tax or any amounts that are salary sacrificed. These figures are a guide to earnings only and should not be used to determine a wage rate.

      $1,160

    • Average full-time The average full-time hours that people in this role work each week.

      45 hours

    • Skill level rating Skill level ratings are based on the range and complexity of job roles. In general, the higher the skill level, the more formal education and training, previous experience or on-the-job training needed to be good at the job.

      Lower

    • Gender share

      67% female

    • Future growth The Department of Employment, Skills, Small and Family Business estimates the likely change in number of workers in this role, or industry, over the next 5 years. Future growth is the likely percentage change compared to all other job roles.

      Decline

    Other jobs include: front of house mixer/assistant, monitor engineer, lighting operator, stage technician, audio visual operator and assistant stage manager.

    Licensing

    This course leads to a licensed occupation in NSW which means you must hold a SafeWork NSW High Risk Work Licence to gain employment in this field. This course includes unit/s that allow you to apply to be assessed for the SafeWork NSW High Risk Work Licence. SafeWork NSW conducts the licence assessment and requires you to be at least 18 years old by the time you are assessed, evidenced by a valid form of ID. 

    During your course, you will enrol in your specific licensing assessment by logging into the MyServiceNSW app. Visit MyServiceNSW to set up your account.  Once logged in, follow these four steps: 

    1. Complete your digital proof of identity by providing two forms of listed identification.
    2. Select and enrol in your chosen SafeWork NSW High Risk Work Licence assessment through your MyServiceNSW account. You’ll receive a confirmation email with your Assessment Enrolment Number (AEN).
    3. Provide your AEN to the SafeWork NSW High Risk Work Licence accessor before your assessment. 
    4. After successfully completing your assessment, your results will be sent directly to your email address. 

    Please note: You can get support with the SafeWork NSW High Risk Work Licence enrolment process by calling Service NSW on 13 77 88, Monday to Friday, 7am to 7pm (AEST).

    Visit SafeWork NSW for more information.

    Study pathways

    Take your study further with other courses offered at TAFE NSW:

    Previous study0 Courses

    Begin here to gain experience and confidence in this study area.

    The Certificate III in Live Production and Technical Services does not have any pre-requisite courses.

    Further study0 Courses

    Advance your skills to take your career to the next level

    The Certificate III in Live Production and Technical Services does not have any post-graduate courses.

    Related study1 Course

    Strengthen your expertise and gain specialist skills to expand your employability.

    Your experience counts

    At TAFE NSW, we recognise your previous study and work experience. You can apply for recognition of prior learning or a credit transfer with any of our courses. If you're successful you'll get your qualification faster.

    UnitsUnits taught in this course

    Courses are made up of a combination of both core and specialty units. In the Certificate III in Live Production and Technical Services qualification, you’ll need to successfully complete 15 units of competency, including 4 core and 11 speciality units.

    Please note, not all specialty units are offered at every TAFE NSW location. It is highly recommended that you check with your preferred campus for information about the specialty units offered at that location.

    Core units are central to the job outcomes of a particular industry or occupation. These are the units industry has agreed are essential to be capable and qualified at a particular study level.

    • Plan a career in the creative arts industryCUAIND314

    • Work effectively in the creative arts industryCUAIND311

    • Participate in collaborative creative projectsCUAPPR314

    • Organise personal work prioritiesBSBPEF301

    TAFE NSW servicesFacilities and support

    TAFE NSW provides support services across all campus locations and online. Whatever your needs or circumstances, we have the people, resources, counselling and facilities to support you in focusing on your studies.

    • TAFE NSW Disability Support Service

    • TAFE NSW Language, Literacy and Numeracy (LLN) support

    • TAFE NSW Aboriginal Support; Learner support (ABE)

    • TAFE NSW Careers, Counselling and Pathways Service

    • TAFE NSW Libraries

    • Scholarship programs – be supported as you explore your talents and fulfil your potential

    • Read&Write literacy and study support software is available free for all TAFE NSW students to use while studying on campus and at home

    • LinkedIn Learning – an online resource which offers innovative courses and tutorials to improve your personal and professional skills

    • Student associations – get social with our student community

    Study optionsFind a location to enrol